banner



How To Draw A Dragon Full Body

Download Article

Download Article

Dragons are some of the almost well-known mythical creatures, made famous from fairy tales and ancient legends. If y'all want to design a dragon on your own, offset pick what blazon you want to draw. Western dragons await similar to other lizards or dinosaurs with wings and are some of the almost commonly seen types in art. Eastern (Chinese or Japanese) dragons commonly don't have wings and resemble a ophidian more than a lizard. With a bit of exercise and patience, you'll exist able to depict whatever type of dragon!

Sentinel our step by pace video here!

  1. one

    Make a large and small circle side by side to one another for the front and dorsum of the torso. Start by making a large circle near the centre of your paper, using a compass if y'all want to get it perfectly round. And so draw another circle that'southward about two-thirds of the size of the first i to the left of it then at that place'due south a small-scale gap between them. The larger circle will become the chest and shoulders of your dragon and the smaller 1 volition exist for the hips.[1]

    • Don't overlap the circles or else your dragon'south body volition wait too short.
    • Your dragon volition look longer if yous put the second circle further away from the first one.
    • Exist conscientious not to draw the circles also large or else the rest of your dragon won't fit on the page.
  2. 2

    Describe a smaller circle with a rounded trapezoid to make the dragon's head. Brand a circle that'due south most one-third of the size of the front end of the body, and place it in a higher place the largest circle so there's a large gap betwixt them. Where you lot draw the circle volition determine how long your dragon's neck will be. Add a pocket-size rounded trapezoid to the right side of the circumvolve to requite your dragon a snout.[2]

    • Use a compass to describe the circumvolve if you want it to await perfectly round. Otherwise, information technology's okay to describe it freehand.
    • Draw with light pencil lines and then you can erase and reposition the head if you lot don't like where you drew it the first time.

    Advertisement

  3. 3

    Sketch curved lines connecting the caput and body circles. Offset from the bottom of the head and describe a curved line that connects to the far correct side of the large circle. And so make some other S-shaped line from the summit of the head and then it intersects the top of the large circle to complete the cervix. Add a curved line from the height of the large circumvolve to the top of the circle on the left. Brand the dragon'south stomach with another curved line that connects the bottom of the large circumvolve to the bottom of the circle on the left.[3]

    • Avoid using directly lines when you connect the circles since it will make the dragon look unnatural.
  4. 4

    Put in lines for the legs and so you know what shape to make them. Start near the center of the largest circle and depict a straight line angled astern so it extends past the lesser of the circle. Then add a small dot to the stop of the line for the talocrural joint joint before drawing another directly line angled forrard that'southward about 1-fourth of the length of the start i. Attach a straight horizontal line for the dragon's foot. Proceed adding lines for the legs on the front end and back circles until your dragon has 4 legs.[4]

    • Some dragons may only have wings instead of front end legs. (Those dragons are called lindworms or wyverns.) If you don't want your dragon to have front end legs, merely leave them off.
  5. five

    Sketch out rounded tube shapes effectually the lines you drew for the legs to bulk them up. Starting time by cartoon a curved line on either side of the leg lines you fabricated before. Brand the legs so they're most the aforementioned thickness as the diameter of the caput. Continue the straight guide lines you lot drew in the middle of the curved lines to add muscles to your dragon'southward legs. Extend the legs downwards to the ankle joints y'all drew at the lesser. Draw 3-4 toes on each foot that end in points to requite your dragon some claws.[five]

    • Yous can as well describe circles and ovals over your lines instead of tube shapes to brand the musculature look more than realistic.
    • Look at pictures of other lizards and reptiles to utilise as references for your dragon's feet since they may take similar features.
  6. 6

    Add a curved tail coming out from the dorsum of the body. Start from the top of the medium-sized circle where the and draw a curved line going toward the left side of the folio. Make the line about the aforementioned length as the dragon'due south torso before ending it. Then draw a second curved line from the bottom of the circle that follows the curves of the first line. End the 2d line so it forms a point with the first one.[6]

    • You can depict your dragon's tail as long as y'all want information technology.
    • Make the tail narrower as it gets closer to the tip so it looks natural.
  7. seven

    Sketch out curved lines for the shape of the dragon'due south wings. Start the base of the fly at the summit of the largest circle simply behind the dragon'southward neck. Extend a curved line going back from the dragon's cervix and stop the line when it'south over the middle of the dragon's body. Then make some other curved line going angled toward the caput and end information technology before it intersects the neck. Brand a long curved horizontal line that ends above the tail to make the meridian of the fly.[7]

    • You lot can add spikes to the top corner of your dragon's wings if you want.
    • You lot can make the wings larger or smaller if you want.

    Tip: The second wing will be hidden behind the 1 that's in front end, so you don't need to worry about drawing it if you lot don't want to.

  8. eight

    Add together the webbing to the wings to connect them to the trunk. Starting time from the tip of the wing that's over the tail and brand a wavy line back toward the eye of the dragon's trunk. Once the line intersects the dragon'southward back, draw curved lines from the top corner of the wing so they extend to the wavy line yous just drew to brand the webbing.

    • Dragon wings traditionally await similar to those of a bat, so you can utilise pictures of them every bit references for your drawing.
  9. ix

    Give your dragon features and horns on its head. Start by drawing small circles for the eyes near the top of the head. Add a bumpy brow ridge higher up the eye to make your dragon look angry or menacing. Draw a line from the end of the muzzle toward the center of the circle to add together the mouth, and put a few pointed teeth coming out of the oral fissure. Then give your dragon 2 curved horns coming off the dorsum of its caput to give information technology more graphic symbol.[8]

    • Some dragons have ears that resemble their wings. If you lot desire to add ears, draw them directly below the horns.
    • The pupil in your dragon's eyes can exist circular or look like a slit.
  10. x

    Erase any lines you made that aren't a part of your dragon. Use your eraser to remove any marks you lot fabricated that aren't a part of your dragon'south body, such every bit the circles or lines in the middles of the legs. Work advisedly and then you don't erase whatsoever of the dragon's outline, or else y'all'll have to redraw sections. Wipe or blow away any eraser shavings to clean off your paper.[9]

    • Apply the eraser on your pencil or utilise a clickable thin eraser to make clean up lines in tight areas.
    • You can go over your dragon's outline with a pen or thin marker before you erase the guide lines to ensure you don't remove whatever marks by accident. Let the pen or marker dry completely before erasing since information technology could smear.
  11. 11

    Add scales if you desire to make your dragon wait realistic. One time you clean up your drawing, add small curved or wavy lines inside the dragon's body to make a scale texture on its skin. Don't draw every single calibration since it could brand your drawing look messy. Work lightly in pencil so you tin erase the scales if they make your drawing visually confusing or if you want to adjust the size of the scales.[10]

    • Y'all don't demand to give your dragon scales if you don't desire.
    • You may also add spikes along your dragons back to add more texture and detail.
  12. 12

    Finished.

    Advertisement

  1. 1

    Draw a circle with a curved jaw for your dragon'south head. Place a circle near the tiptop left side of your newspaper, making sure it's non as well big or else the rest of the dragon won't fit on the folio. Connect a small curved trapezoid shape to the left side of the circle to create a rough outline for dragon's snout.[11]

    • Use a compass or trace around a circular object if you want to draw the circle perfectly.
  2. 2

    Brand 2 more than circles of the same size below and to the right of the head. Position the first circumvolve below the head and so there's a small gap between them. This commencement circle volition exist where you lot place the front pair of legs. Place the second circle to the correct of the circle you just drew so it's the same distance away every bit the caput'south bore. Make sure the centre of the right circle lines up with the top of the first circumvolve y'all drew this step.[12]

    • You don't have to draw perfect circles for the body, but you lot can use a compass or circular object if you lot want.
    • Place the 2d circle further abroad from the first one if y'all want your dragon to have a long body.
  3. iii

    Sketch a curved tube to connect the caput with the other circles. Start a line at the superlative of the head and make an S-shaped curve downwardly toward the top of the first circle. Continue curving the line until information technology intersects with the top edge of the second circle. Repeat the process starting at the bottom of the head and making your curved line to the left side of the showtime circumvolve. Keep extending the line until you reach the bottom of the second circle.[13]

    • Eastern dragons have bodies like to snakes, and then wait at pictures of how a snake curves its torso for references.
  4. iv

    Put a curved tube ending in a point coming off of the far right circle for the tail. Starting time from the top of the far right circumvolve and make another S-shaped curve going toward the right side of the page so it's the aforementioned length equally the head to the first circumvolve. So make a 2d line from the lesser of the circle and follow the same shape as your first line. Taper the end of the tail until information technology comes to a point at the finish. Your dragon will at present look like a long snake.[fourteen]

    • You can make the tail as long equally you want.
  5. five

    Add legs to the bottoms of the curves on the body. Draw a straight tube coming out from the middle of the circumvolve at the front of the dragon's body that's as long as the circle's diameter and about one-quarter as thick. Extend the tube down past the bottom of the circle before drawing a box for the dragons foot. Add three-4 skinnier tubes that are about one-tertiary the length of the leg onto the sides of the box to make your dragon's claws. Draw the other front leg and the dorsum legs the same way.[15]

    • Yous don't have to depict the back legs on your dragon if you don't want to.
    • Your dragon'south anxiety don't need to be flat on the footing since Eastern dragons are commonly drawn flying.
  6. half dozen

    Draw long hair around the dragon's head and legs. Eastern dragons have hair effectually their faces and the bases of their legs. Depict clumps of pilus that cease in a point coming out from where the dragon's caput connects to its neck. So draw pilus in the same way around where the dragon's legs connect to the body for additional item.[sixteen]

    • You lot can make the hair every bit long or as short as y'all want.
    • You can also sketch pilus running down the middle of the dragon'due south back if you want.

    Tip: Eastern dragons may also take beards, so include some hair on the bottom of the muzzle if you lot want to.

  7. 7

    Give your dragon facial features. Showtime past drawing eyebrows on the front of your dragon'south head the same way you added the pilus. Draw circles underneath the eyebrows for your dragon'southward eyes and put in circular pupils. Add a curved line running along the side of the cage to add the dragon's oral fissure, and draw a few sharp teeth poking out from it. Then add thin wavy tubes above the oral cavity coming out near the front of the dragon's cage to give it whiskers.[17]

    • You may also choose to add knobby antlers coming out from the height of your dragon's head.
    • If you want to give your dragon ears, add oblong oval shapes to the sides of its head.
  8. 8

    Erase the circles and other guidelines you drew to clean up your drawing. Go through your drawing with an eraser and get rid of any lines that aren't a part of your dragon'due south body, such as the circles on the torso or head. Be careful non to erase whatsoever of the details you added and then you don't have to redraw them. Tip your paper upright to get rid of any eraser shavings when you're finished.[18]

  9. 9

    Add together curved lines for scales down the length of your dragon's trunk. Make repetitive C-shapes that follow the curves of your dragon's body to add the scales. Depict the scales so they're similar in thickness to your dragon's legs so it doesn't go visually messy. Go along working downward the full length of the dragon's torso until you lot've added all of the scales.[19]

  10. x

    Finished.

    Advertisement

Add together New Question

  • Question

    How do I draw an ice dragon?

    Community Answer

    Draw dragon #2, but instead of flames, draw mist with a light shade of greyness and blue. For the rest of the body, color it with different shades of blue and grey spikes.

  • Question

    How do I draw a nightwing from Wings of Fire?

    Tokayyoshi

    Tokayyoshi

    Community Answer

    Use the #2 model and give information technology nighttime colors similar black, deep purple, and very dark bluish. Add silver or gray dots under the wings.

  • Question

    How do I draw a better looking dragon?

    Community Answer

    Ofttimes information technology is easier to get online and look at images of dragons for inspiration. If you want your dragon to expect "clearer", attempt cartoon with pencil and paper, not on a reckoner.

  • Question

    Is this a hard picture to depict?

    Community Answer

    Information technology might exist if you wonder about information technology instead of trying. Drawing always seems hard at first and it is until yous accept practiced it sufficiently. Give it a become, don't worry about the first many attempts not working, as the process of trying is what matters and creates your drawing skills. If you lot surrender before you lot fifty-fifty start, you'll never learn.

  • Question

    How do I draw a lightening dragon?

    Community Answer

    Draw dragon #2 with lightning effectually its wings, color it blue, and draw a lightning bolt instead of a flame

  • Question

    How long volition it take me to get the perfect dragon?

    Community Answer

    It will depend on your current skills and the amount of time your spend practicing.

  • Question

    How should l brand my infant dragon?

    Eve Wolvington

    Eve Wolvington

    Community Answer

    Try making a baby dragon a fleck smaller than an adult with proportionally larger eyes, cheeks, and anxiety. It might likewise assistance to draw very minor horns.

  • Question

    Is there an easier way to draw a dragon's eye?

    Community Answer

    Endeavor cartoon an oval with points on the sides instead of rounded edges. Within the oval, draw a vertical line.

  • Question

    How do you describe Toothless from How To Train Your Dragon ane and 2?

    Community Answer
  • Question

    How tin can I know the difference between guidelines and parts of the dragon?

    Community Answer

    Guidelines help you to draw the actual dragon. The dragon is much more detailed than the guidelines, which may exist blocked or random shapes that help you see the actual dragon as it forms but aren't needed once the drawing is in place.

Testify more answers

Enquire a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

VideoRead Video Transcript

  • The color of your dragon can decide what environment it lives in or what powers it has. For example, a bluish dragon may breathe ice while a red dragon would breathe fire.

  • Look at pictures of real animals and employ them for influences and references when yous add features to your dragon.

  • Work lightly in pencil so you tin can erase the marks if y'all make a mistake.

Thanks for submitting a tip for review!

Advertisement

Things You'll Demand

  • Paper
  • Pencil
  • Eraser

About This Article

Article Summary X

"To describe a dragon, get-go determine whether you desire to draw a drawing dragon, which will have lots of simple curved lines, or a realistic dragon, which will have more complicated angled lines. And so, choose whether you lot want your dragon to be breathing burn down, flight, continuing on two legs, or posing another fashion. When you're set, sketch the frame of your dragon using bones shapes similar circles and squares. After yous brand the frame, go back in and add details like scales, the eyes, and the wings. "

Did this summary help you?

Thanks to all authors for creating a folio that has been read ane,257,106 times.

Did this commodity aid yous?

Source: https://www.wikihow.com/Draw-a-Dragon

Posted by: hickstherinchis.blogspot.com

0 Response to "How To Draw A Dragon Full Body"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel